Broadcast Tools DSC-20 Instalační manuál Strana 14
- Strana / 57
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Preliminary 8-2002 RSHD Smartcaster Installation Manual
14
CON2 is the interface for the satellite closure inputs. It runs from CON2 of the
Smartcaster to the small blue terminal board.
Notice that the method of constructing the cable involves trapping the flat wire in a
connector. After the connector is crimped, the excess wire is trimmed, a inspection of the
raw end of this cable may show some excess wire still there, if the edge of that wire
comes in contact with the case of the computers, false closures can appear, or a short will
re-boot the computer. Always check for clearance at the connection to the computer.
Audio into and out of Computer
Included with your package are four gold 1/8” mini plug audio cables, these are not cut
down to length. You will remove the RCA plugs from one end of three of the four cables
and discard them.
(Photo)
1/8 mini plugs wired to the green connector
Pin 1- Left +
Pin 2- Shield / Ground
Pin 3- Shield / Ground
Pin 4-Right +
Pin 5- Shield / Ground
One of these cables will run from the REC(ord) out of the RIDZ to the record input of the
RSHD record / audition audio card. There are two cables from the AIR card outputs to
the Channel 9 input on the RIDZ.
The fourth audio cable is run from the audition output jack of the RSHD box to your
audio console for cue return audio. This cable is unbalanced audio, and the only
interconnection to you equipment that is so. You may add one of a number of brands of
converters to bring this up to fully level balanced audio. That is recommended,
especially on older consoles that need the extra output level.
One such device is from Radio Design Labs. The STA-1.
Figure 6 STA-1 Level matching device
E-Mail: RDL American/Asian Sales: (800) 281-2683, (805) 684-5415, Fax: (800) 289-
7338, (805) 684-9316
- Smarts Broadcast Systems 1
- Smartcaster 1
- Modes of Operation 3
- THE INSTALLATION 4
- Setting up and plugging in 5
- Electrical Safety 8
- LAN Network CAT-5 Wiring 9
- Right: 11
- Wrong! 11
- Computer setup 12
- LAN Network 13
- Keyboard / Video extenders 13
- Computer to RIDZ control 13
- Audio Levels 16
- The RIDZ Switcher 18
- Wiring the RIDZ 19
- Global Inputs 29
- Wiring the Starguide 34
- Testing STAGUIDE Relays 35
- INPUT DIAGNOSTICS 36
- MONITORING STARGUIDE RELAYS 37
- TONE DECODERS 37
- Replacing A Power Supply 46
- Inovonics PBX000 51
- BROADCAST TOOLS 52
- Hubs and switches 55
- KVM Devices 56
Související produkty a manuály pro Přijímač Broadcast Tools DSC-20
Přijímač Broadcast Tools DSC-20 Specifikace
(18 stránky)
(18 stránky)
Epson R260 - Stylus Photo Color Inkjet Printer manuály
Uživatelské manuály a uživatelské příručky pro Tisk a skenování Epson R260 - Stylus Photo Color Inkjet Printer.
Poskytujeme 1 manuály pdf Epson R260 - Stylus Photo Color Inkjet Printer ke stažení zdarma podle typů dokumentů: Servisní příručka
Komentáře k této Příručce