Broadcast Tools WVRC-8 Specifikace stáhnout pdf (Strana 26)

e-mail:

[email protected]

voice:

360.854.9559

fax:

866.783.1742

WVRC-8 Installation and Operation Manual

SETUP

NOTE: The network administrator may be required to enter the IP address of the

WVRC-8 into the SMTP server to allow email forwarding. In some installations, an email

forwarding service such as

http://www.smtp.com/ may be required for the email function to

operate properly.

7 - IP address of a NTP timeserver, if used.

NOTE: Here is the IP address for the NIST NTP server 132.163.4.103

(

http://tf.nist.gov/service/time-servers.html) or pool.ntp.org.

The WVRC-8’s RJ-45 (Network) is normally attached to a DSL/Cable router, Ethernet

hub or switch. The supplied “Device Installer” software should be used to configure the

IP address of your WVRC-8.

The “Device Installer” version 4.2 software or greater is also available on our web site:

www.broadcasttools.com, under downloads or on the supplied CD.

NOTE: The Device Installer application requires Microsoft’s .NET Framework version 1.1.

If you do not already have .NET Framework version 1.1 or greater (dotnetfx.exe)

installed, you can download it from the Microsoft web site.

1 - Install the “Device Installer” software on the PC used for the WVRC-8 setup.

NOTE: The WVRC-8 applet requires a compatible Java Runtime Environment Version

6 Update 6.6 or greater). If your browser is lacking Version 6 Update 6.6 or greater, we

have provided a link to download the required application:

http://www.java.com/en/download/index.jsp, then click on the “Free Java Download” button

and follow the prompts. This is also available on our web site:

www.broadcasttools.com,

under downloads or on the supplied CD.

2 - Connect the supplied BLUE straight-through CAT 5 cable to the RJ-45 connector on

the WVRC-8 labeled (Network)

and the other end to your hub or switch.

NOTE: If you are attaching the WVRC-8 directly to your computer, you MUST use the

supplied GRAY Xover

CAT 5 cable and set your PC’s IP for 192.168.1.60

3 - Connect the supplied 12 VAC @ 1amp power supply to the WVRC-8’s power jack

labeled 12VAC/1 Amp. Verify that the front panel power LED and left “LINK” LED

above the “NETWORK” RJ-45 are illuminated

Ethernet port LED indicator functions

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 40 41

Komentáře k této Příručce

Žádné komentáře

Broadcast Tools WVRC-8 Specifikace Strana 26

Komentáře k této Příručce

Související produkty a manuály pro Dálková ovládání Broadcast Tools WVRC-8