Broadcast Tools SS 2.1/Terminal III Uživatelský manuál Strana 1

Procházejte online nebo si stáhněte Uživatelský manuál pro Sítě Broadcast Tools SS 2.1/Terminal III. Broadcast Tools SS 2.1/Terminal III User manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 188
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků

Shrnutí obsahu

Strany 1 - Starlink SL9003Q

Moseley SL9003Q 602-12016 Revision G User Manual Starlink SL9003Q Digital Studio Transmitter Link Doc. 602-12016-01 Revision G

Strany 2 - WARRANTY

x Moseley SL9003Q 602-12016 Revision G Figure 8-2 Starlink SL9003Q RX Main/Standby Connection (w/OPTIMOD)...F-5 Figure 8-3 Receiver

Strany 3

5-10 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G TRANSMITTER SITE (STL RX)RS-232 Data Interface to BurkRemote Co

Strany 4

Section 5: Module Configuration 5-11 Moseley SL9003Q 602-12016 Revision

Strany 5

5-12 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G 5.5 IF Card Upconverter/Downconverter There are no user adjustm

Strany 6

Section 5: Module Configuration 5-13 Moseley SL9003Q 602-12016 Revision

Strany 7 - Table of Contents

5-14 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G 5.6.2. Changing Frequency — RX The carrier frequency of receive

Strany 8

Section 5: Module Configuration 5-15 Moseley SL9003Q 602-12016 Revision

Strany 9 - List of Figures

5-16 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G 5.8 MUX Module 5.8.1. Composite MUX (4-Port) Figure 5-13 Co

Strany 10

Section 5: Module Configuration 5-17 Moseley SL9003Q 602-12016 Revision

Strany 11 - Specifications

5-18 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G 5.9 NMS/CPU Module Provides system CPU control, front panel inte

Strany 12 - 1.1 System Introduction

Section 5: Module Configuration 5-19 Moseley SL9003Q 602-12016 Revision

Strany 13 - 1.2 System Features

Moseley SL9003Q 602-12016 Revision G 1 System Features and Specifications

Strany 14 - 1.3 Specifications

5-20 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G 5.9.2. Relay Electrical Interface Relays 1 to 4 (pins 8 through

Strany 15

Section 5: Module Configuration 5-21 Moseley SL9003Q 602-12016 Revision

Strany 16

5-22 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G To set “Map Faults-Relays”, perform the following steps: On the

Strany 17

Section 5: Module Configuration 5-23 Moseley SL9003Q 602-12016 Revision

Strany 18

5-24 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G 5.9.3.2. Mapping Set 2 and “Map Faults-Relays” Set ON Relays r

Strany 19

Section 5: Module Configuration 5-25 Moseley SL9003Q 602-12016 Revision

Strany 20

5-26 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G (This page intentionally left blank)

Strany 21 - FCC Part 15 Notice

Moseley SL9003Q 602-12016 Revision G 6 Customer Service

Strany 22

6-2 Section 6: Customer Service Moseley SL9003Q 602-12016 Revision G 6.1

Strany 23 - 2 Quick Start

Section 6: Customer Service 6-3 Moseley SL9003Q

Strany 24 - 2.2 Notices

1-2 Section 1: System Features and Specifications Moseley SL9003Q 602-12016 Revision G 1.1 Sys

Strany 25 - WARNING

6-4 Section 6: Customer Service Moseley SL9003Q 602-12016 Revision G 6.4

Strany 26 - 2.3 Rack Mount

Section 6: Customer Service 6-5 Moseley SL9003Q

Strany 27 - Transmitter

6-6 Section 6: Customer Service Moseley SL9003Q 602-12016 Revision G

Strany 28 - RX ANTENNA

Moseley SL9003Q 602-12016 Revision G 7 System Description

Strany 29 - Digital Composite

7-2 Section 7: System Description Moseley SL9003Q

Strany 30 - SL9003Q TX Main Menu

Section 7: System Description 7-3 Moseley SL9003Q

Strany 31 - AUTO/OFF/ON

7-4 Section 7: System Description Moseley SL9003Q

Strany 32 - 2.6.1. Audio

Section 7: System Description 7-5 Moseley SL9003Q

Strany 33 - 2.6.3. Data Channels

7-6 Section 7: System Description Moseley SL9003Q

Strany 34 - 2.7 Performance

Section 7: System Description 7-7 Moseley SL9003Q

Strany 35

Section 1: System Features and Specifications 1-3 Moseley SL9003Q 602-12016 Revision G 1.2 System Features In addition to establishing a new ind

Strany 36 - Receiver Performance Check

7-8 Section 7: System Description Moseley SL9003Q

Strany 37 - 3 Installation

Section 7: System Description 7-9 Moseley SL9003Q

Strany 38 - 3.1 Rear Panel Connections

7-10 Section 7: System Description Moseley SL9003Q

Strany 39 - CAUTION

Section 7: System Description 7-11 Moseley SL9003Q

Strany 40

7-12 Section 7: System Description Moseley SL9003Q

Strany 41 - 3.2 Preliminary Bench Tests

Moseley SL9003Q 602-12016 Revision G 8 Appendices

Strany 42 - SL9003Q 2 Channel

8-2 Appendices Moseley SL9003Q 602-12016 Revision G

Strany 43

Appendix A: Path Evaluation Information A-1 Moseley SL9003Q 602-12016 Revision G Appendix A: Path Evaluation Information Please visit www.mos

Strany 44 - 3.2.1. RF Bench Test

A-2 Appendix A: Path Evaluation Information Moseley SL9003Q

Strany 45

Appendix A: Path Evaluation Information A-3 Moseley SL9003Q 602-12016 Revision G There are in addition, of course, the second, third, fourth, et

Strany 46

1-4 Section 1: System Features and Specifications Moseley SL9003Q 602-12016 Revision G 1.3 Spec

Strany 47

A-4 Appendix A: Path Evaluation Information Moseley SL9003Q

Strany 48

Appendix A: Path Evaluation Information A-5 Moseley SL9003Q 602-12016 Revision G Where CF is the Fresnel zone clearance and F1 is the first Fres

Strany 49

A-6 Appendix A: Path Evaluation Information Moseley SL9003Q

Strany 50 - 3.3 Site Installation

Appendix A: Path Evaluation Information A-7 Moseley SL9003Q 602-12016 Revision G Table 8-1 Typical Antenna Gain ANTENNA TYPE 450 MHz BAND 9

Strany 51

A-8 Appendix A: Path Evaluation Information Moseley SL9003Q

Strany 52 - 3.3.2. Power Requirements

Appendix A: Path Evaluation Information A-9 Moseley SL9003Q 602-12016 Revision G a (terrain factor) = 4 for smooth terrain. = 1 for average ter

Strany 53 - (Typical)

A-10 Appendix A: Path Evaluation Information Moseley SL9003Q

Strany 54 - 3.4.3. Environmental Seals

Appendix A: Path Evaluation Information A-11 Moseley SL9003Q 602-12016 Revision G Over a year, the fade probability due to climate is given by:

Strany 55 - 3.6 Link Alignment

A-12 Appendix A: Path Evaluation Information Moseley SL9003Q

Strany 56

Appendix A: Path Evaluation Information A-13 Moseley SL9003Q 602-12016 Revision G A.2.7 Path Calculation Balance Sheet Frequency of operation

Strany 57 - 4 Operation

Section 1: System Features and Specifications 1-5 Moseley SL9003Q 602-12016 Revision G Bit Error Immunity >1X10E-4 for no subjective loss in

Strany 58

A-14 Appendix A: Path Evaluation Information Moseley SL9003Q

Strany 59 - 4.2.1 LCD Display

Appendix B: Audio Considerations B-1 Moseley SL9003Q 602-12016 Revision G Appendix B: Audio Considerations B.1 Units of Audio Measurement B

Strany 60

B-2 Appendix B: Audio Considerations Moseley SL9003Q

Strany 61

Appendix C: Glossary of Terms C-1 Moseley SL9003Q 602-12016 Revision G Appendix C: Glossary of Terms A/D, ADC Analog-to-Digital, Analog-to-

Strany 62

C-2 Appendix C: Glossary of Terms Moseley SL9003Q

Strany 63

Appendix D: Microvolt – dBm – Watt Conversion D-1 Moseley SL9003Q 602-12016 Revision G Appendix D: Microvolt – dBm – Watt Conversion (50 ohm

Strany 64 - SAVE SETTINGS?

D-2 Appendix D: Microvolt – dBm – Watt Conversion Moseley SL9003Q

Strany 65 - 7.4 Screen Menu Summaries

Appendix E: Spectral Emission Masks E-1 Moseley SL9003Q 602-12016 Revision G Appendix E: Spectral Emission Masks The following spectral co

Strany 66 - 4.4.2 System: Card View

E-2 Appendix E: Spectral Emission Masks Moseley SL9003Q

Strany 67 - 4.4.4 System: Info

Appendix F: Redundant Backup F-1 Moseley SL9003Q 602-12016 Revision G Appendix F: Redundant Backup with TP64 and TPT-2 Transfer Panels F.1

Strany 68

1-6 Section 1: System Features and Specifications Moseley SL9003Q 602-12016 Revision G Audio Di

Strany 69 - Caution

F-2 Appendix F: Redundant Backup Moseley SL9003Q

Strany 70

Appendix F: Redundant Backup F-3 Moseley SL9003Q 602-12016 Revision G F.5 Equipment Interconnection F.5.1 Starlink SL9003Q Backup Opera

Strany 71 - Section 4: Operation 4-15

F-4 Appendix F: Redundant Backup Moseley SL9003Q

Strany 72

Appendix F: Redundant Backup F-5 Moseley SL9003Q 602-12016 Revision G NLG!AGAINST RISK OF FIRE,REPLACE WITH SAME TYPEFOR CONTINUED PROTECTION

Strany 73 - Section 4: Operation 4-17

F-6 Appendix F: Redundant Backup Moseley SL9003Q

Strany 74 - 4.4.8 System: Date/Time

Appendix F: Redundant Backup F-7 Moseley SL9003Q 602-12016 Revision G receiver fails, the line will go LOW, and input 2 will be selected (the

Strany 75 - Section 4: Operation 4-19

F-8 Appendix F: Redundant Backup Moseley SL9003Q

Strany 76 - 4.4.11 Alarms/Faults

Appendix F: Redundant Backup F-9 Moseley SL9003Q 602-12016 Revision G Receiver Composite Switching The Starlink Digital Composite requires an

Strany 77

F-10 Appendix F: Redundant Backup Moseley SL9003Q

Strany 78

Appendix F: Redundant Backup F-11 Moseley SL9003Q 602-12016 Revision G F.5.3 Digital STL with Analog STL Backup using a TPT-2 System Consid

Strany 79

Section 1: System Features and Specifications 1-7 Moseley SL9003Q 602-12016 Revision G Table A- 1 Bit Rate, Threshold and Bandwidth for SL9003Q

Strany 80

F-12 Appendix F: Redundant Backup Moseley SL9003Q

Strany 81 - Section 4: Operation 4-25

Appendix F: Redundant Backup F-13 Moseley SL9003Q 602-12016 Revision G GNDGNDINPGM APGM BOUTB ACTRANSMITTER AGND INPUTTRANSMITTER BGND PRO

Strany 82

F-14 Appendix F: Redundant Backup Moseley SL9003Q

Strany 83 - 4.4.13 Radio TX Status

Appendix F: Redundant Backup F-15 Moseley SL9003Q 602-12016 Revision G Receiver Composite Switching The redundant (backup) composite scenario

Strany 84

F-16 Appendix F: Redundant Backup Moseley SL9003Q

Strany 85 - 4.4.14 Radio RX Status

Appendix F: Redundant Backup F-17 Moseley SL9003Q 602-12016 Revision G TX LOCKINTERNAL FUSE RATING:INPUT: 110-240V, 47-63Hz250V3ADISCONNECT

Strany 86 - 4.4.16 Radio RX Control

F-18 Appendix F: Redundant Backup Moseley SL9003Q

Strany 87 - Section 4: Operation 4-31

Appendix F: Redundant Backup F-19 Moseley SL9003Q 602-12016 Revision G Receiver Audio Switching - External If there is no Optimod (or simila

Strany 88 - MHz950. 0000

F-20 Appendix F: Redundant Backup Moseley SL9003Q

Strany 89 - Radio RX Config

Appendix F: Redundant Backup F-21 Moseley SL9003Q 602-12016 Revision G F.6.2 TP64 Front Panel Controls and Indicators Figure 8-12 TP6

Strany 90

1-8 Section 1: System Features and Specifications Moseley SL9003Q 602-12016 Revision G Spurious

Strany 91 - 5 Module Configuration

F-22 Appendix F: Redundant Backup Moseley SL9003Q

Strany 92 - AUDIO ENC

Appendix F: Redundant Backup F-23 Moseley SL9003Q 602-12016 Revision G By pressing the RADIO B button, RADIO B now becomes the Master, and the

Strany 93 - CAUTION:

F-24 Appendix F: Redundant Backup Moseley SL9003Q

Strany 94

Appendix G: Optimizing Radio Performance for Hostile Environments G-1 Moseley SL9003Q 602-12016 Revision G Appendix G: Optimizing Radio Perform

Strany 95 - S21 – Data Channel

G-2 Appendix G: Optimizing Radio Performance for Hostile Environments Moseley SL9003Q

Strany 96 - S23 – System Config

Appendix G: Optimizing Radio Performance for Hostile Environments G-3 Moseley SL9003Q 602-12016 Revision G Table 8-10 Interleave Setting vs.

Strany 97 - 5.2.1. AES/EBU and SPDIF

G-4 Appendix G: Optimizing Radio Performance for Hostile Environments Moseley SL9003Q

Strany 98 - 5.2.3. Data Channel Rate

Appendix H: FCC Applications Information H-1 Moseley SL9003Q 602-12016 Revision G Appendix H: FCC APPLICATIONS INFORMATION - FCC Form 601 T

Strany 99 - 5.3.1. Data Channel

H-2 Appendix H: FCC Applications Information Moseley SL9003Q

Strany 100

Section 1: System Features and Specifications 1-9 Moseley SL9003Q 602-12016 Revision G 1.3.5. Audio Encoder Specifications Sample Rate 32/44.1/

Strany 101

ii Moseley SL9003Q 602-12016 Revision G WARRANTY All equipment designed and manufactured by Moseley Associates, Inc., is warranted against defect

Strany 102

1-10 Section 1: System Features and Specifications Moseley SL9003Q 602-12016 Revision G 1.3.7.

Strany 103

Section 1: System Features and Specifications 1-11 Moseley SL9003Q 602-12016 Revision G 1.4 Regulatory Notices FCC Part 15 Notice Note: This eq

Strany 105 - 5.7 Power Amplifier

Moseley SL9003Q 602-12016 Revision G 2 Quick Start

Strany 106 - 5.8 MUX Module

2-2 Section 2: Quick Start Moseley SL9003Q 602-12016 Revision G 2.1 Unpacking The following is a list of all included items. Description Qty SL

Strany 107

Section 2: Quick Start 2-3 Moseley SL9003Q 602-12016 Revision G WARNING HIGH VOLTAGE IS PRESENT INSIDE THE POWER SUPPLY MODULE WHEN THE UN

Strany 108 - 5.9.1. External I/O

2-4 Section 2: Quick Start Moseley SL9003Q 602-12016 Revision G 2.3 Rack Mount The SL9003Q is normally rack-mounted in a standard 19” cabinet. L

Strany 109

Section 2: Quick Start 2-5 Moseley SL9003Q 602-12016 Revision G SL9003Q 2 or 4 Channel ReceiverLED constantly GREEN for normal operationLED con

Strany 110

2-6 Section 2: Quick Start Moseley SL9003Q 602-12016 Revision G RX AntennaTX Antenna950 MHz+30 dBm1 WLED’s are constantly GREEN for norm

Strany 111

Section 2: Quick Start 2-7 Moseley SL9003Q 602-12016 Revision G Digital Composite ReceiverSerial Data to Remote Control(RS-232, 300 baud, 8 bit

Strany 112

iii Moseley SL9003Q 602-12016 Revision G SL9003Q Manual Dwg # 602-12016-01 R: G Revision Levels: SECTION DWG REV ECO REVISED/ REL

Strany 113

2-8 Section 2: Quick Start Moseley SL9003Q 602-12016 Revision G 2.5 Transmitter Power-Up Setting The LCD screen (“RADIO TX CONTROL”) selects th

Strany 114

Section 2: Quick Start 2-9 Moseley SL9003Q 602-12016 Revision G • Verify the AUTO setting (default setting, as shipped). AUTORadio TX Control

Strany 115 - Vout (Vdc)

2-10 Section 2: Quick Start Moseley SL9003Q 602-12016 Revision G 2.6 Default Settings and Parameters Listed below are the typical default module

Strany 116

Section 2: Quick Start 2-11 Moseley SL9003Q 602-12016 Revision G 2.6.2. Composite The composite channel is located on the Composite MUX (4-Port

Strany 117 - 6 Customer Service

2-12 Section 2: Quick Start Moseley SL9003Q 602-12016 Revision G 2.6.4. RF Module Parameters The RF module parameters are optimized for the ship

Strany 118 - 6.2 Technical Consultation

Section 2: Quick Start 2-13 Moseley SL9003Q 602-12016 Revision G Figure 2-5 Radio TX Status Performance Check

Strany 119 - 6.3 Factory Service

2-14 Section 2: Quick Start Moseley SL9003Q 602-12016 Revision G Receiver Performance Check Use the RADIO MODEM STATUS screens to check the SL900

Strany 120 - 6.4 Field Repair

Moseley SL9003Q 602-12016 Revision G 3 Installation

Strany 121

3-2 Section 3: Installation Moseley SL9003Q 602-12016 Revision G 3.1 Rear Panel Connections 3.1.1. Power Supply Slot The leftmost slot in the

Strany 122

Section 3: Installation 3-3 Moseley SL9003Q 602-12016 Revision G ANLG110-240V, 47-63HzDGTLAC P/SDISCONNECT LINE CORDPRIOR TO MODULE REMOVALCAU

Strany 123 - 7 System Description

iv Moseley SL9003Q 602-12016 Revision G

Strany 124 - 7.6 Transmitter

3-4 Section 3: Installation Moseley SL9003Q 602-12016 Revision G The DC input is isolated from chassis ground and can be operated in a positive

Strany 125

Section 3: Installation 3-5 Moseley SL9003Q 602-12016 Revision G 3.2 Preliminary Bench Tests It is best to perform back-to-back tests of the en

Strany 126 - 7.6.1. Audio Encoder

3-6 Section 3: Installation Moseley SL9003Q 602-12016 Revision G SL9003Q 2 Channel ReceiverLED constantly GREEN for normal operationLED const

Strany 127

Section 3: Installation 3-7 Moseley SL9003Q 602-12016 Revision G Figure 3-4 SL9003Q Digital Composite Bench Test Setup

Strany 128

3-8 Section 3: Installation Moseley SL9003Q 602-12016 Revision G 3.2.1. RF Bench Test Test Equipment RF Wattmeter 950 MHz operation with a meas

Strany 129 - 7.6.5. Power Amplifier

Section 3: Installation 3-9 Moseley SL9003Q 602-12016 Revision G STATUSRadio LaunchRXScroll Right/Left to choose:STATUS/CONTROL/CONFIGURE/COPYS

Strany 130 - 7.7 Receiver

3-10 Section 3: Installation Moseley SL9003Q 602-12016 Revision G 9. With the POST-BER in the display, press ENTER. This will reset the bit

Strany 131 - 7.7.1. Receiver Module

Section 3: Installation 3-11 Moseley SL9003Q 602-12016 Revision G 13. Reset the bit counter (press ENTER) and verify error-free operation 14. P

Strany 132

3-12 Section 3: Installation Moseley SL9003Q 602-12016 Revision G 8. Measure the audio frequency response: 32 kHz sample rate: 5 Hz-15 kHz +

Strany 133 - 7.7.4. Audio Decoder

Section 3: Installation 3-13 Moseley SL9003Q 602-12016 Revision G Procedure 1. Connect the equipment as shown in Fig. 3-4. Be sure to physica

Strany 134

v Moseley SL9003Q 602-12016 Revision G Using This Manual - Overview Section 1 System Features and Specifications A short discussion of the SL9

Strany 135 - 8 Appendices

3-14 Section 3: Installation Moseley SL9003Q 602-12016 Revision G CHANNEL 1 connector on the receiver. Default interface is 300 baud, 8 bit, od

Strany 136

Section 3: Installation 3-15 Moseley SL9003Q 602-12016 Revision G Figure 3-5 Receiver Site Installation Details

Strany 137 - A.1. Introduction

3-16 Section 3: Installation Moseley SL9003Q 602-12016 Revision G 3.3.1. Facility Requirements The site selected to house the SL9003Q should fol

Strany 138

Section 3: Installation 3-17 Moseley SL9003Q 602-12016 Revision G (Typical) Figure 3-6 Rack Ear Bracket Mounting Methods 3.4 Antenna/Feed Syst

Strany 139

3-18 Section 3: Installation Moseley SL9003Q 602-12016 Revision G edges to avoid damage. A kinked line indicates damage, so the damaged piece m

Strany 140

Section 3: Installation 3-19 Moseley SL9003Q 602-12016 Revision G 3.5 Transmitter Antenna Testing After assuring that the SL9003Q is properly

Strany 141 - A.2. Path Analysis

3-20 Section 3: Installation Moseley SL9003Q 602-12016 Revision G data rate. By pressing ENTER while viewing the screen, the error count will r

Strany 142 - A.2.2 Losses

Moseley SL9003Q 602-12016 Revision G 4 Operation

Strany 143

4-2 Section 4: Operation Moseley SL9003Q 602-12016 Revision G 7.1 Introduction This section describes the front panel operation of the SL9003Q

Strany 144

Section 4: Operation 4-3 Moseley SL9003Q 602-12016 Revision G 4.2.1 LCD Display The Liquid Crystal Display (LCD) on the SL9003Q front panel i

Strany 145

vi Moseley SL9003Q 602-12016 Revision G

Strany 146

4-4 Section 4: Operation Moseley SL9003Q 602-12016 Revision G 4.2.3 LED Status Indicators There are eight status indicator LED's on the

Strany 147

Section 4: Operation 4-5 Moseley SL9003Q 602-12016 Revision G Table 4-2 LED Status Indicator Functions (Receiver) LED Name Function

Strany 148

4-6 Section 4: Operation Moseley SL9003Q 602-12016 Revision G Table 4-3 LED Status Indicator Functions (Repeater/Full Duplex Systems)

Strany 149

Section 4: Operation 4-7 Moseley SL9003Q 602-12016 Revision G 4.3 Screen Menu Navigation and Structure 4.3.1 Screen Menu Navigation Main Men

Strany 150

4-8 Section 4: Operation Moseley SL9003Q 602-12016 Revision G 4.3.2 Saving Settings (system-wide) Changes MadeSAVE SETTINGS?NO The "Sa

Strany 151 - B.1.3 Voltage-Based Systems

Section 4: Operation 4-9 Moseley SL9003Q 602-12016 Revision G Figure 4-4 Top Level Screen Menu Structure Note: There may be minor differenc

Strany 152 - B.1.4 Old Habits Die Hard

4-10 Section 4: Operation Moseley SL9003Q 602-12016 Revision G 4.4.1 Meter Function Settings Summary Bargraph ENCDR1, 2, … DECDR1, 2, … NON

Strany 153

Section 4: Operation 4-11 Moseley SL9003Q 602-12016 Revision G 4.4.3 System: Power Supply Function Settings Summary Primary AC DC Ind

Strany 154

4-12 Section 4: Operation Moseley SL9003Q 602-12016 Revision G 4.4.5 System: Basic Card Setup CARD IDChnl CdMuxMUX0CHC1Basic Card SetupQ

Strany 155 - Conversion (50 ohms)

Section 4: Operation 4-13 Moseley SL9003Q 602-12016 Revision G 4.4.6 Factory Calibration The Factory Calibration Screens are documented below

Strany 156

vii Moseley SL9003Q 602-12016 Revision G Table of Contents 1 System Features and Specifications 1-1 1.1 System Introduction 1-2 1.2 System Fe

Strany 157

4-14 Section 4: Operation Moseley SL9003Q 602-12016 Revision G Figure 4-6 Factory Calibration-Radio RX Screens RADIO TXFactory CalibrateRA

Strany 158

Section 4: Operation 4-15 Moseley SL9003Q 602-12016 Revision G RADIO TXFactory CalibrateRADIO RXQAM MODEMSYSTEMSystem Cal15V-RFABATT15V-RFA-

Strany 159

4-16 Section 4: Operation Moseley SL9003Q 602-12016 Revision G 4.4.7 SYSTEM: UNIT-WIDE PARAMS Calc Ber alwaysRMT/LOCLOCSynth Doubler NOParame

Strany 160

Section 4: Operation 4-17 Moseley SL9003Q 602-12016 Revision G Function Settings Summary Unit No 1-255 Defines Unit # for network ID MAIN TI

Strany 161

4-18 Section 4: Operation Moseley SL9003Q 602-12016 Revision G 4.4.8 System: Date/Time System DateMonthYearDay 299806System TimeMinutesSecon

Strany 162 - Modem Splitter

Section 4: Operation 4-19 Moseley SL9003Q 602-12016 Revision G 4.4.10 System: External I/O (NMS) Function Settings Summary Ext A/D Reading

Strany 163 - Data Sharing Device

4-20 Section 4: Operation Moseley SL9003Q 602-12016 Revision G 4.4.11 Alarms/Faults ALARMS Module Parameter Nominal Trip Value LED Statu

Strany 164 - SL9003Q Receiver

Section 4: Operation 4-21 Moseley SL9003Q 602-12016 Revision G FAULTS Module Parameter Nominal Trip Value LED Status QAM RF TX Forward Pow

Strany 165

4-22 Section 4: Operation Moseley SL9003Q 602-12016 Revision G 4.4.12.1 QAM Modulator Status - Transmitter Function Settings Summary BAUD LO

Strany 166

Section 4: Operation 4-23 Moseley SL9003Q 602-12016 Revision G SPCTR NRML Spectrum Normal or Invert FLTR xx % Nyquist filter INTRL x Interlea

Strany 167

viii Moseley SL9003Q 602-12016 Revision G 7 System Description 7-1 4.7 Introduction 7-2 4.8 Transmitter 7-2 4.9 Receiver 7-8 8 Appendices 8-1 Appe

Strany 168

4-24 Section 4: Operation Moseley SL9003Q 602-12016 Revision G To determine the rate at which errors occur, or how many errors occur in any per

Strany 169

Section 4: Operation 4-25 Moseley SL9003Q 602-12016 Revision G Function Settings Summary SLOSS x.xxxE+xx Signal Loss ES x.xxxE+xx Error Seco

Strany 170

4-26 Section 4: Operation Moseley SL9003Q 602-12016 Revision G 4.4.12.4 Radio Modem Status - Common Screens Function Settings Summary TEST

Strany 171 - ASSEMBLED IN USA

Section 4: Operation 4-27 Moseley SL9003Q 602-12016 Revision G RX Clock DATA Source: RPT CLK Source: RPT Clk Phase: Normal Inverted FVers.

Strany 172 - Switcher/Router

4-28 Section 4: Operation Moseley SL9003Q 602-12016 Revision G Warning on Adjusting Transmit Power Attempting to increase the transmit powe

Strany 173

Section 4: Operation 4-29 Moseley SL9003Q 602-12016 Revision G 4.4.14 Radio RX Status Function Settings Summary Freq 948.0000 MHz Displays

Strany 174

4-30 Section 4: Operation Moseley SL9003Q 602-12016 Revision G 4.4.15 Radio TX Control TX RadiateRadio TX ControlAUTO Function Settings Sum

Strany 175

Section 4: Operation 4-31 Moseley SL9003Q 602-12016 Revision G Function Settings Summary Mode/Effic 16Q/4 32Q/5 64Q/6 128Q/7 256Q/8 QPSK/2 Se

Strany 176

4-32 Section 4: Operation Moseley SL9003Q 602-12016 Revision G TX Clock Clk Source: EXT TXC EXT RXC RECOVERED INTERNAL Clk Phase: Normal Invert

Strany 177 - INPUT: 90-260V, 47-63Hz

Section 4: Operation 4-33 Moseley SL9003Q 602-12016 Revision G 4.4.19 Radio RX Configure FreqRadio RX ConfigMHz950. 0000LO Side LOWRadio RX C

Strany 178

ix Moseley SL9003Q 602-12016 Revision G List of Figures Figure 2-1 SL9003Q Typical Rack Mount Bracket Installation...

Strany 179

4-34 Section 4: Operation Moseley SL9003Q 602-12016 Revision G (This page intentionally left blank)

Strany 180

Moseley SL9003Q 602-12016 Revision G 5 Module Configuration

Strany 181 - F.7.2 TP64 Settings

5-2 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G 5.1 Introduction This section provides the experienc

Strany 182

Section 5: Module Configuration 5-3 Moseley SL9003Q 602-12016 Revision G Digital Data Stream I/O: (V.35/RS449)Data Output: RS232 levels, 9pin

Strany 183 - For Hostile Environments

5-4 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G (This page intentionally left blank)

Strany 184

Section 5: Module Configuration 5-5 Moseley SL9003Q 602-12016 Revision G2016 Revision G MPEG Encoder-M M1 M0 ISO/MPEG

Strany 185

5-6 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G ISO/MPEG Decoder Board M1

Strany 186

5-7 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G 5.2.1. AES/EBU and SPDIF Switch S81 configures the digital audio input

Strany 187 - INFORMATION - FCC Form 601

5-8 Section 5: Module Configuration Moseley SL9003Q 602-12016 Revision G 5.2.2. Analog Audio Gain and Input Impedance Encoder (Analog In

Strany 188

Section 5: Module Configuration 5-9 Moseley SL9003Q 602-12016 Revision

Komentáře k této Příručce

Žádné komentáře